AASHTO M43-05 pdf free download
AASHTO M43-05 pdf free download.Sizes of Aggregate for Road and Bridge Construction.
1. SCOPE
1.1. This specification defines aggregate size designations and ranges in mechanical analyses for standard sizes of coarse aggregate and screenings for use in the construction and maintenance of various types of highways and bridges.
1.2. The values stated in SI units are to be regarded as the standard.
2. REFERENCED DOCUMENTS
2.1. A/t.S!ITO Suindardc:
A M 92, Wire-Cloth Sie es for Testing Purposes
A T 2, Sampling of Aggregates
A T 27, Sieve Analysis of Fine and Coarse Aggregates
3. – SIGNIFICANCE AND USE –
3.1. Some contract documents specify certain aggregate sizes for specific uses or may suggest one or more of these sizes as appropriate for the preparation of various end-product mixtures. In some cases, closer limits on variability of the aggregate grading are required.
4. MANUFACTURE
4.1. The standard sizes of aggregate described in this classification are manufactured by means of any suitable process used to separate raw material into the desired size ranges. Production of standard sizes by blending two or more difierent components is also permitted.
STANDARD SIZES
5.1. Standard sizes of coarse aggregate shall comply with the sizes given in Table I. All sizes shall be determined by means of laboratory sieves having square openings and conforming to M 92.
6. BASIS OF CLASSIFICATION
6.1. Cla.ssificalion is based upon the Size number and size ranges shown in Table 1 with the aggregate sampled in accordance with T 2 and tested for grading by T 27.AASHTO M43 pdf download.
